XKC-40 small size precision CNC lathe is designed to meet the need for efficient and accurate automation production of medium to small diameter parts. the lathe is fitted with standard.Equipment of C-axis comtour and optional accessory of revolving tools(for drilling,slot Milling and rigid tapping),fiexible and combined machining makes it a fact on comb type tool rest Lathe that composite machining equals single set up.
High Precision Spindle
The cartridge type spindle of lathe is supported by Japan super precision bearings.The arrangment of 3 front bearing and 2 rear bearings ensure high rigidity and lasting accuracy of spindle.Spindle run out is less than ≤3μm.
Accurate Feed
Each feeding axis is driven by servo motors through Japan THK precision ball screw.Machining accuracy is ensured and long time accuracy is remained.Repeatability is less than <±1μm.
High Efficiency Machining
Max.Speed of spindle is 5500rev/min.Rapid traverse rate of X and Z axes is up to 20m/min.Auto parts feeder can be equipped to fulfill fast and efficient automation production.
Large travel comb type tool rest
Super large comb type tool rest gives minimum repeatability error during tool change.It is fast,precise and considerably time saving.
Extra heavy cutting
Hydraulic rotary cylinder with high speed and high accuracy combined with rigid and precise power chuck increase greatly heavy cutting and tough metal cutting capacity.
Powerful force cooling
The powerful coolant pump greatly improves cutting ability and cooling condition.
Machine Specifications
Capacity | Max.swing dia .over bed | ?400mm |
Wing over cross slide | ?90mm | |
Max. turning diameter | ?360mm | |
Maximum turning length | 200mm | |
Spindle | Spindle speed | 4500rpm(Chuck)/5500rpm( Collet Chuck) |
Through hole diameter | (Chuck)?45mm /(Collet Chuck)?42mm | |
Spindle bore dia | ?57mm | |
Main motor | 40F:3.7/5.5KW 40FA/40FC:5.5KW/7.5KW | |
Axes | Travel X | 360mm |
Travel Z | Chuck:230mm Collet chuck:220mm | |
Rapid feed X/Z | 18m/min | |
X/Z feed motors | Servo1.2KW | |
Turret | Number of stations | 7 |
Tool size turning tool/boring tool | 20*20/?25mm | |
Caxis (only 40FC) | Min.control angle | 0.001° Degree BZI encoder |
Other | Collet chuck | 5寸5 Inches |
Rotating hydraulic cylinder | 6寸6 Inches | |
Required electric Power | 12KWV | |
Floor space(length* width *height) | 1811*1523*1672mm | |
Mass of Machine | About2100KG |
CNC unit Specifications
Control system | FANUC Oi-MATE TD/TF | |
Controlled axes | Simultaneously controllable 2axes, 1 axis in manual mode | |
Simultaneously controllable 3 axes ,1 axis in manual mode(only FC type) | ||
Input system | MDI keyboard input combine use of absolute / incremental programming | |
Part program storage length | 640M(512K) | |
Interpolation function | Linear Taper Circular Threading | |
Least input increment | 0.0001 | |
Least command incerment | X:0.0005 Z:0.001 | |
Feed rate | Feed per minute | 1-10000mm/min |
Feed per revolution | 0.0001-500mm/rev | |
Tool offset | Geometry | ±999.9999 |
Wear | ±9.9999 | |
Tool offset pairs | The 64 pairs | |
Number of register able program | 400個pairs | |
Manual handle feed | 0.5/0.1/0.01/0.001 | |
Auxiliary function | M S T | |
Dwell time | 0~99999.999秒seconds | |
Feed rate override | 0~150% | |
Rapid traverse override | F0、F25、F50、F100 | |
Input/output interface | RS232C | |
Display Language | Chinese / English | |
C contouring control (HC only) | Cs0.0001 (BZI encoder) |
Standard appendage
Coolant device with chip tank | 1 Set |
Lighting unit | 1 Set |
Automatic slide surface lubricate | 1 Set |
Hydraulic clamping unit | 1 Set |
Preset base | 1 Set |
S1、S2 Tool holders S | 1 pieces each |
S3 Tool holders S3 | 1 Set |
I.D Tool holder | 1 Set |
Milling collet chuck | 1 Set |
Tools and tool box | 1 Set |
Circuit breake | 1 Set |
Machine base | 4 piece |
Machine vinyl cover | 1 Set |
Signal lamp | 1 Set |
Hydraulic chuck (6 inch) | 1 Set |
Transformer | 1 Set |
Heat exchanger | 1 Set |
C Contouring control(only XKC-40FC type) | 1 Set |
Machine full enclosed housing | 1 Set |
Optional accessories
5 inch collet (with 1 spring collet) |
Parts feeder |
Auto parts catcher |
Parts conveyer |
Spring collet |
Kinds of cutters |
400W Cross driven tools |
Pneumatic system |
Various fixture and collets |
Counter |
Sleeve |