<tt id="hy6po"><strong id="hy6po"><table id="hy6po"></table></strong></tt>
  • <pre id="hy6po"></pre>
    <sup id="hy6po"><div id="hy6po"></div></sup>

    <address id="hy6po"></address>

    • PRODUCTS chanpinzhanting

      You Are Here:HOME > PRODUCTS

      XKC-B35 double spindle milling center.

      B35.jpg


      The main performance characteristics of the XKC-B35 series double spindle turning center are: double spindle, power tower  B axis, X, Y, Z three axis feed, turn milling and turn adjustment two sequence processing. The process concentrates, once clamping to achieve the processing of raw materials to finished products.

      1.Linear guide rail, quench grinding guide combination, full play speed and rigidity, good stability;

      2.The B axis of the knife tower and the linear feed X/Y/Z axis can be used to realize the complicated shape milling;

      3.Configuring the tool - pair instrument, simplify the cumbersome knife, adjust the knife work;

      4.Large span flat bed, slant saddle structure, stable and reliable operation at high speed;

      5.The straight handle power cutter can realize the drilling and milling of the X, Z direction and the inclined plane;

      6.A set of machining tools can be called and processed on the side of the spindle and the side of the auxiliary spindle;

      7.The small and medium parts of the medical equipment, the automobile industry and the precision machinery are efficient and complex;

      8.Power tool design double spindle went on two opposite side drive ,which can realize the efficient milling vice spindle parts;

      9.With rod (below 32) as the raw materials for automatic processing of small parts, suitable for small and medium enterprises, scientific research institutes.

      Specification parameters of machine tool body

      Chuck

      Standard layout

      6 Inch hollow power chuck

       

      Range of work

      Swing over cross slide

      ?350mm

      Maximum distance between main and auxiliary shafts

      1110mm

      Max.working diameter

      ?300mm

      Max.working length

      550mm

      Maximum bar

      ?32mm

      Distance to go

      X axis movement

      320(235+85)mm

      Z1 axis movement

      960mm

      Z2 axis movement

      960mm

      Y axis movement

      ±50mm

       

      Feed axis

      Cutting feed rate

      X/Y/Z1/Z2 axis         30/10/40/30m/min

      Feed speed

      X axis  0.001-500mm/rev

      Y axis  0.001-500mm/rev

      Z1 axis  0.001-500mm/rev

      Servo motor

      X axis   2.7kw

      Y axis   2.5kw

      Z1 axis   2.7kw

      Z2 axis   2.7kw

      Principal axis

      Spindle speed

      30~6000r/min

      Spindle taper

      A2-5

      Spindle bore diameter

      ?45mm

      Diameter of spindle front bearing

      ?80mm

       

      Main motor power

      5.7/7.5Kw

      Spindle torque

      120N·m

      Main shaft driving mode

      Standard wide-angle band

      C axis outline

      Sub spindle

      Chuck specification

      6 Inch hollow power chuck

      Spindle speed

      30~6000r/min

      Spindle taper

      A2-5

      Spindle bore diameter

      ?45mm

      Diameter of spindle

      front bearing

      ?80mm

      Main motor power

      5.7/7.5Kw

      Spindle torque

      120N·m

      Main shaft driving mode

      Standard wide-angle band

      C axis outline

      B axis

      Drive mode

      Servo motor + gear

      Fix type

      3 Pieces of tooth disc

      Dividing time

      90°/180°       0.94/1.4sec

      Tool turret

      Tool post type

      Power turret tool rest

      Tool number

      12

      Tool size 

      Inner/Diameter  OD/ID  20/?25mm

      Drive mode

      Servo motor + gear

      Fix type

      3 Pieces of tooth disc

      Dividing time

      Adjacent tool      0.5sec

      Power tool

      Drive mode

      Servo motor synchronous drive

      Power of motor

      2.5Kw

      Power knife number

      12

      Power tool
      specifications and models

      BMT55

      Power cutter chuck, cap

      ER25/?42

      Tool specification

      1~16mm

      Tool change time

      Adjacent knife position        0.5sec

      Maximum speed of power tool

      30~4000r/min

      Machine protectio

      Noumenon

      Lighting

      Safety door

      Hydraulic pressure system

      Fuel tank capacity

      15L

      Hydraulic pressure value

      3.5Mpa

      Flux

      12L/min

      Power of motor

      1.5Kw

      Lube oil system

      Volume

      1.5L

      Control system

      System name

      FANUC-31iB

      Setting gauge

      Hand tool setting gauge

      3 direction

      Cutting fluid system

      Water tank

      200L

      Cooling pump

      Power      500W

      Flux       50L/min

      Work piece dimensions to

      Maximum work piece weight

      10*2kg

      Max.work piece

      135*90mm

      Others

      Machine size L*W*H

      4700*2200*2000mm

      Weight of Machine

      5500kg

      Optional configuration

      8 Inch chuck

      Sub spindle: Motorized spindle

      Automatic door

      Gantry robot

      All kinds of knives and chucks

      Power unit BMT55 and chuck


      service hotline:+86-0917-8915000

      MONE

      Copyright reserved: BAOJI XILI PRECISION MACHINERY CO.,LTD Technical support:DAYOU123 E-mail:bjxlxkc@163.com

      ADD:NO.17,ROAD,HIGH-TECH DEVELOPMENT ZONE,BAOJI CITY SHAANXI PROVINCE. TEL:+86-917-8915000(SALES) +86-917-8915002(AFTER-SALES SERVICE) FAX:+86-917-8915009


      国产a级黄色特级片_国产精品三级一区二区_极品人妻无码在线_国产AV毛片一区二区
      <tt id="hy6po"><strong id="hy6po"><table id="hy6po"></table></strong></tt>
    • <pre id="hy6po"></pre>
      <sup id="hy6po"><div id="hy6po"></div></sup>

      <address id="hy6po"></address>